| Step01 |
 |
1-1)At "X" spread the strands of Cover Br. apart
to pry out the Core Br. and pull all out.
1-2)Mark one big line on the Core Br. where it comes out.(Mark #1)
1-3)Cut the end of Core Br. obliquely and tape tightly to form sharp and
firm point.
|
| Step02 |
 |
2-1)Slide Cover Br. toward knot to pull out Core Br. more.
2-2)Mark two big lines at a distance equal to the short section of the
Fid.(Rope's Dia.X 9) (Mark #2)
2-3)Mark three big line at a distance of one short length plus one full
Fid length from Mark #2 (Mark #3)
|
| Step03 |
 |
3-1)Insert Fid into Core Br. at Mark #2 and slide through
Tunnel (Core Br.)to bring out the end of Fid at Mark #3
3-2)Jam the taped point of the Cover Br. into the Fid.
3-3)Push it through Tunnel(fid) from Mark #2 to Mark #3 until Dot almost
disappear into Core Br. at Mark #2
|
| Step04 |
 |
4-1)Insert another Fid in Cover Br. at Dot (here is Corssover)
and slide it through Tunnel(Cover Br.)toward "X"
4-2)Jam the taped point of Core Br. into Fid
4-3)Push it through Tunnel (Fid) to come out at "X"
4-4)Pull out all of both points of Cover and Core Br. to be tight.
|
| Step05 |
 |
5-1)Cut off tape from the point of Cover Br. and unravel
Cover Br.
5-2)Cut off groups of strands as shown to form a tapered end
5-3)Hold the loop at the Crossover and firmly smooth both sides of the
loop away from crossover to disappear tapered ends inside Core Br. completely.
|
| Step06 |
 |
6-1)Hold rope at Knot and slide the slack of Covr Br.
gently toward the Eye until Crossover is buride inside Cover Br.
6-2)Cut off the tail of Core Br. fairly close(abt. 1/8")to the cover
Br.
6-3)Whip near Throat.
|
Click to enlarge image
Related Keywords:
Bookmark / Share this page